- Indespension Trailers
- >
- Indespension Twin Axle 12' x 6' x 6'H Livestock Cattle Trailer
Indespension Twin Axle 12' x 6' x 6'H Livestock Cattle Trailer
SKU:
£6,520.00
£6,520.00
Unavailable
per item
The LV35126 is a twin axle 12' x 6' x 6'H livestock trailer, with a gross weight of 3500kg.
Made for heavy-duty use and speed of operation, the LV35126 range of livestock trailers have been designed from the ground up with longevity and speed of use in mind. Constructed with a seven leaf spring suspension, premium AL-KO manual adjust brakes, waterproof IP67 LED lighting and robust cast coupling. This model is equipped with a 1690 x 1796 ramp as standard, set at a loading angle of 10° for larger livestock.
Prices shown are exclusive of VAT
-
Features
-
Specification
-
Enquire
<
>
The LV35126 Livestock Cattle Trailer is a twin axle 12' x 6' x 6' high trailer, with a gross vehicle weight of 3500kg.
Ideal for carrying smaller livestock loads, the Livestock range of trailers are constructed of an all steelwork hot dip galvanised chassis to provide maximum strength and durability, with no rusting. The trailers are also fitted with upper and lower lift off easy access doors, which are not only easy to remove but refit. The lower access doors which are fitted on both sides of the trailer, combined with the chequer plate steps at the front and rear of the mudguards, help maximise access and improve safety when loading / inspecting livestock.
Indespension livestock trailers are all fitted with anti-kicking devices too, adding extra protection to the operative. Dividing gates are fitted in a hanging position and are attachable on each arch on the trailer, offering flexibility in use. Constructed with a fully sealed treadplated aluminum floor, with PAR tanalised planks under floor help prevent seepage of effluent, improved appearance and provide more even floor surface, whilst protected against rot.
Other Indespension standard features include the installation of our Triplelock high security head, AL-KO manual adjust brakes for optimum braking performance, robust heavy duty seven leaf spring suspension for a longer trailer life, EU approved LED water proof lighting and high quality taper roller bearing hubs.
Additional extras include 14” and 16” wheel upgrades, fold down front, double wing loading gates, sheep deck or combined sheep gates, internal lights and slurry tanks.
Ideal for carrying smaller livestock loads, the Livestock range of trailers are constructed of an all steelwork hot dip galvanised chassis to provide maximum strength and durability, with no rusting. The trailers are also fitted with upper and lower lift off easy access doors, which are not only easy to remove but refit. The lower access doors which are fitted on both sides of the trailer, combined with the chequer plate steps at the front and rear of the mudguards, help maximise access and improve safety when loading / inspecting livestock.
Indespension livestock trailers are all fitted with anti-kicking devices too, adding extra protection to the operative. Dividing gates are fitted in a hanging position and are attachable on each arch on the trailer, offering flexibility in use. Constructed with a fully sealed treadplated aluminum floor, with PAR tanalised planks under floor help prevent seepage of effluent, improved appearance and provide more even floor surface, whilst protected against rot.
Other Indespension standard features include the installation of our Triplelock high security head, AL-KO manual adjust brakes for optimum braking performance, robust heavy duty seven leaf spring suspension for a longer trailer life, EU approved LED water proof lighting and high quality taper roller bearing hubs.
Additional extras include 14” and 16” wheel upgrades, fold down front, double wing loading gates, sheep deck or combined sheep gates, internal lights and slurry tanks.
Gross Weight (kg): 3500
Unladen Weight (kg): 1186
Internal Dimensions L x W x H (m): 3.65 x 1.8 x 1.8
Internal Dimensions L x W x H (ft x ins): 12’ x 6’ x 6’
Studding: 5 x M16
PCD (mm): 165.1
Standard Ramp Dimension (mm): 1690 x 1796
Standard Ramp Angle: 9°
Tyre Size: 185/70R13C
Axles: 2
Unladen Weight (kg): 1186
Internal Dimensions L x W x H (m): 3.65 x 1.8 x 1.8
Internal Dimensions L x W x H (ft x ins): 12’ x 6’ x 6’
Studding: 5 x M16
PCD (mm): 165.1
Standard Ramp Dimension (mm): 1690 x 1796
Standard Ramp Angle: 9°
Tyre Size: 185/70R13C
Axles: 2